HOHMANN & BARNARD, INC.

Description: Veneer anchors

Description: Class 6: Building materials, namely, metal hardware for use in the construction of buildings and walls, namely, veneer ties formed from metal wire, metal trusses and ladder mesh for reinforcing joints of masonry walls, and adjustable wall ties formed from metal wire; masonry metal hardware, namely, veneer ties, box ties, pintles, and metal anchors and fasteners therefor
Class 17: Sealants for use in the construction industry for flashing, waterproofing, protection of exterior sheathing, or the prevention of air infiltration

Description: Metal rod members used for reinforcing masonry walls

Description: Metal wall reinforcement members for building

Description: Resin-based sealant for application to walls and wall assemblies

Description: Metal hardware for reinforcing masonry walls, namely, wire ladder reinforcing and restraining anchors for wall panel veneers, repair anchors for stabilizing wall panel veneers, and masonry wall ties

Description: Metal fastening hardware, namely, anchors for securing stone wall panels to substrates

Description: Metal fastening hardware for repairing walls, namely, mechanical repair anchors for stabilizing veneers to substrates

Description: Class 6: Construction elements made of metal, namely, metal building flashing, metal-core elastomeric building flashing, and metal building flashing for masonry, metal building flashing; metal foils for metal building flashing, metal drip plates and metal weep-hole fittings for metal building flashing installations, metal building flashing combined with pressure-activated adhesives, all manufactured to meet building code requirements and marketed in and to the masonry and commercial construction industries
Class 17: Plastic drip plates [ and plastic weep-hole fittings ] for use in non-metal building flashing installations, all manufactured to meet building code requirements and marketed in and to the masonry and commercial construction industries
Class 19: Peel-and-stick non-metal building flashing, namely, reinforced elastomeric sheeting combined with pressure-activated adhesives for use as roof and masonry flashing and reinforced plastic sheeting for use as flashing for masonry installations, all manufactured to meet building code requirements and marketed in and to the masonry and commercial construction industries

Description: Metal through-wall flashing for the construction industry | [ Non-metal through-wall flashing for the construction industry ]

Description: Building materials, namely, metal hardware for use in the construction of buildings and walls, namely, veneer ties formed from metal wire, metal trusses and ladder mesh for reinforcing joints of masonry walls, and adjustable wall ties formed from metal wire; Masonry metal hardware, namely, veneer ties, box ties, pintles, and metal anchors and fasteners therefor

Description: Prefabricated elastomeric roof and masonry flashing; flashing combined with pressure-activated adhesives; building materials, namely, metal-core elastomeric flashing; and accessories for flashing installations, namely, metal drip plates and metal weep-hole fittings; plastic products for use with masonry installations; peel-and-stick flashing materials for building construction, namely, reinforced elastomeric sheeting; and accessories for flashing installations, namely, plastic drip plates and plastic weep-hole fittings

Description: Adhesive cement, namely, mastic

Description: Building materials, namely, [ building insulation, molded and extruded plastic products for use with masonry installations; ] foam materials for use in expansion joints; polyethylene foam products for building construction, namely, expansion joint fillers and glass block panel anchors; polyethylene backer rods; neoprene sponge; polyethylene joint fillers with tear strips to predetermine sealant depth; neoprene sponge joint fillers; and, neoprene sponge joint fillers with tear strips to predetermine sealant depth

Description: Metal hardware items for use in the construction of buildings and walls, namely, wall ties formed from metal wire; metal trusses and ladder mesh for reinforcing joints of masonry walls; adjustable wall ties formed from metal wire; masonry metal hardware, namely, ties, box ties, pintles and anchors; and metal anchors

Description: Precompressed joint sealant of polyurathane foam with a modified acrylic flame retarding polymer used in construction industry for flashing, waterproofing, protection of exterior sheathing, or the prevention of air infiltration

Description: Non-metallic building material in the nature of a rubberized asphalt compound laminated to a high-density cross-laminated polyethylene film, for use in the construction industry for flashing, waterproofing, protection of exterior sheathing, or the prevention of air infiltration

Description: Wall reinforcement goods; namely, metal wall reinforcing members; wall ties, made primarily of metal; and metal wall and veneer anchors, made primarily of metal

Description: Metal reinforcement bar connectors; namely, connectors for reinforcement bars embedded in seismic-resistant block structure

Description: VENEER ANCHORS MADE PRIMARILY OF METAL

Description: WALL REINFORCING MEMBERS MADE OF METAL

Description: WALL REINFORCING MEMBERS MADE OF METAL

Description: VENEER ANCHORS

Description: REINFORCEMENT AND ADJUSTABLE TIE ASSEMBLIES FOR MASONRY WALL CONSTRUCTION

Description: REINFORCEMENT AND ADJUSTABLE TIE ASSEMBLIES FOR MASONRY WALL CONSTRUCTION

Description: CUSTOM FABRICATION OF BOLTS, BENT RODS, WIRE SHAPES, CLIP ANGLES, BENT STRAPS AND WELDED ANCHOR PLATES; CONCRETE AND STONE ANCHORS, TIES, AND INSERTS, JOIST HANGERS, VENTILATOR GRILLS, FLOOR SCUPPERS, VENTILATING LOUVERS AND ACCESS DOORS

Description: CUSTOM FABRICATION OF BOLTS, BENT RODS, WIRE SHAPES, CLIP ANGLES, BENT STRAPS AND WELDED ANCHOR PLATES; CONCRETE AND STONE ANCHORS, TIES AND INSERTS, JOIST HANGERS, VENTILATOR GRILLS, FLOOR SCUPPERS, VENTILATING LOUVERS AND ACCESS DOORS

Description: Fabric Flashing

Description: WALL REINFORCING MEMBER COMPRISING A BENT OR FABRICATED UNIT CONSTRUCTED WITH IRON RODS OR WIRE FOR EMBEDDING IN A MORTAR JOINT BETWEEN BRICK, BLOCK OR OTHER UNITS OF A BUILD-UP MASONRY WALL

Description: Building materials, namely, [ building insulation, molded and extruded plastic products for use with masonry installations; foam materials for use in expansion joints, namely, foam backer rods; ] polyethylene foam products for building construction, namely, expansion joint fillers and glass block panel anchors; polyethylene backer rods; polyethylene joint fillers with tear strips to predetermine sealant depth; neoprene sponge joint fillers; and, neoprene sponge joint fillers with tear strips to predetermine sealant depth

Description: Building materials, namely, thermal and acoustical insulation for buildings; cork products for use with masonry and reinforced concrete installations; cork and cork-based materials for use in expansion joints; cork products for building construction, namely, expansion joint fillers for bridges, dams, highways, runways, and tunnels; insulative underlayment; sound insulation for recording studios and acoustic test areas; vibration control mounts for building installations; and, gaskets and seals for building components

Description: Building insulation, molded and extruded products in the form of bars, blocks, panels, strips, and sheets for use with masonry installations; foam materials formed in situ to conform with the location and preformed blocks, sheets, and strips of the foamed material for use in expansion joints; polyethylene foam products in the form of bars, blocks, panels, strips, and sheets for building construction, namely, expansion joint fillers and glass block panel anchors; polyethylene backer rods; neoprene sponge; polyethylene joint fillers with tear strips to predetermine sealant depth; neoprene sponge joint fillers; and, neoprene sponge joint fillers with tear strips to predetermine sealant depth

Description: Building insulation, molded and extruded products in the form of bars, blocks, panels, strips, and sheets for use with masonry installations; foam materials formed in situ to conform with the location and preformed blocks, sheets, and strips of the foamed material for use in expansion joints; polyethylene foam products in the form of bars, blocks, panels, strips, and sheets for building construction, namely, expansion joint fillers and glass block panel anchors; polyethylene backer rods; neoprene sponge; polyethylene joint fillers with tear strips to predetermine sealant depth; neoprene sponge joint fillers; and, neoprene sponge joint fillers with tear strips to predetermine sealant depth

Description: WALL REINFORCING MEMBERS MADE PRIMARILY OF METAL

Description: METAL ROD MEMBERS USED FOR REINFORCING MASONRY WALL